18.5.22 Installing The Camshafts - Husqvarna FE 250 2016 Repair Manual

18 ENGINE

18.5.22 Installing the camshafts

224
Guideline
Nut, cylinder
head
I Angle disc (60029010000)
-
Mount and tighten nut
Guideline
Nut, cylinder
head
309273-11
-
Pull up the timing chain and insert the intake camshaft
-
Place the timing chain over the camshaft gear of intake
camshaft.
✓ Marking
the cylinder head.
-
Ensure that bleeder
Slip in exhaust camshaft
-
Place the timing chain over the camshaft gear and position
the camshaft in the bearing seat.
✓ Marking
the cylinder head.
M10x1 .25 Tightening sequence:
Tighten diagonally.
1st tightening stage
10 Nm (7.4 lbf ft)
2nd tightening stage
30 Nm (22.1 lbf ft)
3rd tightening stage
50 Nm (36.9 lbf ft)
engine oil/cone greased
(� p. 323)
fD.
M6 10 Nm (7.4 lbf ft)
Lubricated with engine
O
is positioned and is aligned with the edge of
8
is correctly positioned.
fD.
O
is positioned and is aligned with the edge of
Thread, oiled with
oil
411
O.