Removing The Torque Limiter; Positioning The Engine At Ignition Top Dead Center; Removing The Timing Chain Tensioner - Husqvarna FE 250 2016 Repair Manual

18.3.9

Removing the torque limiter

18.3.10

Positioning the engine at ignition top dead center

18.3.11

Removing the timing chain tensioner

-
Remove torque limiter
-
Turn the crankshaft counterclockwise until marking
flush with the edge of the cylinder head.
-
Remove screw
Info
Check through the hole whether the position notch of
the crankshaft is visible.
-
Mount and tighten screw
-
Loosen screw
-
Remove screw
309267-10
O.
O.
O
without the washer.
O.
8
with the seal ring.
18 ENGINE
O
is
165