Husqvarna FE 250 2016 Repair Manual page 157

48.
Remove screws
Take off the slave cylinder of the clutch and hang it to one
side.
• Info
I
Do not kink the clutch line.
Do not activate the clutch lever while the slave cylin­
der of the clutch is removed.
Gs).
Unplug connector
«D-
Unplug connector
Pull back the protection cap.
Unplug connector Gi).
Detach the spark plug connector.
Loosen hose clip 41).
Pull off the throttle valve body to the rear.
Loosen hose clip 6i).
Pull off the radiator hose.
Remove fittings ...
Take off the engine braces.
18 ENGINE
155