18.3.28
Removing the left section of the engine case
18.3.29
Removing the shift rails
O.
-
Remove screws
-
Tilt the left section of the engine case upward and remove the
screw connections of the engine fixing arm.
-
Insert the special tool into the crankshaft.
I
Protection cap (75029090000)
8
-
Mount special tool
with the appropriate screws.
I
Puller (77229048000)
(I!!:!
•
Info
I
Use the drill hole marked with 772.
-
Take off the section of the engine case.
Info
Do not subject the section of the engine case to any
stress.
The washer of the main shaft usually adheres to the
bearing.
-
Take off the left section of the engine case.
-
Remove the special tool.
O
-
Remove shift rail
together with upper spring
(D
-
Remove shift rail
together with upper spring
lower spring.
(�
p. 325)
p. 327)
@.
C,
and the
18 ENGINE
..
175