Table of Contents
Advertisement
2 SAFETY ADVICE
2.1
Read this Repair Manual carefully and thoroughly before beginning work. It contains useful information and tips
that will help you repair and maintain your vehicle.
This manual assumes that the necessary special Husqvarna tools and Husqvarna workplace and workshop
equipment are available.
2.2
A number of safety instructions need to be followed to operate the model described safely. Therefore read this
instruction and all further instructions included carefully. The safety instructions are highlighted in the text and
are referred to at the relevant passages.
2.3
A
A
Note
Indicates a danger that will lead to considerable machine and material damage if the appropriate measures are
*
not taken.
�
2.4
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. Example: bearing puller (15112017000)
During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,
seals, sealing rings, O-rings, pins, and lock washers).
In the case of certain screws, a thread locker (e.g.
instructions.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change dam
aged or worn parts.
After completing a repair or service work, check the operating safety of the vehicle.
8
Re�air Manual
Safety advice
Info
Various information and warning labels are attached in prominent locations on the model described. Do
not remove any information or warning labels. If they are missing, you or others may not recognize dan
gers and may therefore be injured.
Degrees of risk and s mbols
Danger
Indicates a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Indicates a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Indicates a danger that may lead to minor injuries if the appropriate measures are not taken.
Warning
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
Work rules
®
Loctite
)
is required. Apply according to the manufacturer's
Advertisement
Table of Contents
