Table of Contents
Advertisement
9 SHOCK ABSORBER, SWINGARM
64
e
/
201418-10
e
C,
Mount rebound washer
ward.
Mount the compression shim stack
shims facing downward.
-
Sand both sides of piston (3 on a surface plate using 1200-
grit sandpaper.
-
Clean the piston.
-
Assemble the piston.
Guideline
View6)
View@
Mount the rebound shim stack @ with the smaller shims
facing upward.
fD
Mount washer
with the collar facing downward.
with the cut-out facing down
0
with the smaller
Piston from above
Piston from below
Advertisement
Table of Contents
