6 FORK, TRIPLE CLAMP
6.24
36
Installing the lower tri�le clam�
801632-10
402556-11
Main work
-
Clean the bearing and sealing elements, check for damage,
and grease.
I High viscosity grease
(I!!:!
-
Position the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
-
Check whether upper steering head seal
tioned.
8
Mount protective ring
-
Position the upper triple clamp with the handlebar.
C,
-
Mount screw
but do not tighten yet.
-
Position the clutch line in the guide above the voltage regula-
tor.
-
Position the fork legs.
0
✓ Bleeder screws
are positioned toward the front.
Info
The compression damping is located in left fork
leg
(white adjusting screw). The rebound
COMP
damping is located in right fork leg
screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
p. 316)
O
is correctly posi
8.
and 0-ring
(red adjusting
REB