Checking The Free Travel Of Foot; Brake Lever - Husqvarna FE 250 2016 Repair Manual

16 BRAKE SYSTEM
Warning
brake.
-
142
Checking the free travel of foot brake lever
The brake system fails in the event of overheating.
Danger of accidents
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
Set the free travel on the foot brake lever in accordance with the specification.
402026-10
-
Add brake fluid to level f).
I Brake fluid DOT 4
-
Mount screw cap
Info
Clean up overflowed or spilled brake fluid immediately
with water.
-
l
Disconnect spring
-
Move the foot brake lever back and forth between the end
stop and the contact to the foot brake cylinder piston and
check free travel f).
Guideline
Free travel at foot brake
lever
If the free travel does not meet specifications:
-
Adjust the basic position of the foot brake lever.
(I!\',! p. 143)
-
Reconnect spring
(I!\',! p. 314)
O 8
with membrane and O-ring.
O.
3 ... 5 mm (0.12 ... 0.2 in)
O.
..
..