Changing Front Wheel Bearing - Husqvarna FE 250 2016 Repair Manual

14.7.4

Changing front wheel bearing

Main work
O.
-
Remove screws Remove the brake disc.
-
Clean the contact surface of the brake disc.
-
Position the new brake disc with the label facing outward.
Mount and tighten screws
Guideline
Screw, front M6
brake disc
Finishing work
-
Install the front wheel. (�
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
Remove shaft seal rings
@)
-
Press out bearing using a suitable tool.
e
• Info
I
Spacing tube
-
Remove the spacing tube.
0
Press out bearing using a suitable tool.
0
-
Press in new bearing
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
O.
14 Nm (10.3 lbf ft)
Loctite
p. 112)
(� p. 12)
(� p. 111)
O 8.
and
can be pushed aside.
all the way using a suitable tool.
14 WHEELS
® 243
™
113