Husqvarna FE 250 2016 Repair Manual page 183

Mount lock ring
Press the shaft seal ring
the outside with the open side facing in.
309288-10
Press the new bearing
outside using a suitable tool.
309289-10
Press in shaft seal ring
facing outward.
Remove lock ring
Remove shaft seal ring Q) of the crankshaft.
Press the new shaft seal ring in with the open side facing
inward.
Info
Press the shaft seal ring inward to the point where the
lock ring can be mounted.
Provide suitable support for the clutch cover while
309290-10
pressing in.
Mount lock ring@).
Blow out the oil channel with compressed air and check that
it is clear.
@}.
(D
all the way in from the inside to
8
all the way in from the inside to the
O
all the way, with the open side
0.
18 ENGINE
41
181