Service Work On The Chassis 12; Raising The Motorcycle With The Rear Lifting Gear; Removing The Rear Of The Motorcycle From The Lifting Gear - Husqvarna Svartpilen 250 2022 Owner's Manual

12.1

Raising the motorcycle with the rear lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.2

Removing the rear of the motorcycle from the lifting gear

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.

SERVICE WORK ON THE CHASSIS 12

Condition
Rear wheel is not removed.
–
Remove screw
F02808-10
–
Mount the supports of the lifting gear.
Guideline
Screw on left side: M10x70
–
Insert the adapter in the rear lifting gear.
Retaining adapter (61029955244)
Rear wheel work stand (6932995500033)
–
Stand the motorcycle upright, align the lifting gear to the
link fork and the adapters, and raise the motorcycle.
E01138-01
Condition
Rear wheel is removed.
–
Remove the license plate bracket. (
–
Mount the supports of the lifting gear.
–
Insert the adapter in the rear lifting gear.
Retaining adapter (61029955244)
Rear wheel work stand (6932995500033)
–
Stand the motorcycle upright, align the lifting gear to the
link fork and the adapters, and raise the motorcycle.
402346-01
1
.
p. 59)
51