Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 354

Expansion cards and backup units
▶ Connect the Oculink cables to the PRAID EP5x0i as shown (1, 2).
Figure 229: Installing PRAID EP5x0i
▶ Install one PRAID EP5x0i in slot 8 (1).
▶ Install one PRAID EP5x0i in slot 9 (2).
▶ Connect the HDD LED cable to the connector "HDD LED1" on the system
board (3).
▶ Install one PRAID EP5x0i in slot 2.
▶ Connect the HDD LED cable to the connector "HDD LED2" on the system
board (4).
▶ If applicable, connect an FBU to the expansion card, see
FBU" on page
354
380.
Upgrade and Maintenance Manual
"Installing an
TX2550 M5