Upgrading From 8X To 16X 2.5-Inch Hdd/Ssd Configurations - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

7.5.12 Upgrading from 8x to 16x 2.5-inch HDD/SSD
configurations
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
After installing or removing an additional backplane, never forget to
change the system information using the Chassis ID Prom Tool.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove all HDD/SSD modules, see
modules" on page
▶ If applicable, remove all dummy modules, see
SSD dummy module" on page
▶
"Removing the system air duct" on page
▶ Remove the fan bridge, see
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
49.
220.
219.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
Hardware: 20 minutes
Software: 10 minutes
107.
50.
51.
"Removing 2.5-inch HDD/SSD
"Removing a 2.5-inch HDD/
67.
92.
261