Replacing A 2.5-Inch Hdd Sas Backplane - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

▶ Prepare the removing of the defective PCIe SSD module, see the "NVMe
User Guide".
▶ Depending on your operating system (see the "NVMe User Guide"),
"Shutting down the server" on page
Removing the defective 2.5-inch PCIe SSD module
▶ Remove the PCIe SSD module, see
modules" on page
▶ If applicable, remove the PCIe SSD from the installation frame, see
"Handling HDDs or SSDs without installation frame" on page
Installing the new 2.5-inch PCIe SSD module
▶ If applicable, install the PCIe SSD in the installation frame, see
HDDs or SSDs without installation frame" on page
▶ Install the PCIe SSD module, see
on page 225.
Concluding steps
▶ When working on a floorstand model, close the HDD bay cover, see
"Installing the HDD bay cover" on page
▶ If applicable,
"Switching on the server" on page
▶ If applicable, rescan available devices from your operating system, see the
"NVMe User Guide".
7.5.9

Replacing a 2.5-inch HDD SAS backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
49.
228.
"Installing 2.5-inch PCIe SSD modules"
Upgrade and Maintenance Manual
"Removing 2.5-inch PCIe SSD
166.
77.
83.
Hardware: 15 minutes
166.
"Handling
231