Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 452

Accessible drives
Figure 295: Removing the locking latch from the ultraslim ODD
▶ Remove the two screws (1).
▶ Remove the locking latch (2).
▶ If the removed ultraslim ODD is not to be replaced by a new drive:
▶ Fasten the locking latch to the ultraslim ODD with its two original screws
to the HDD cage (see
▶ Insert the ultraslim ODD dummy cover (see
Installing the 4x 3.5-inch HDD extension box
▶ Install the 4x 3.5-inch HDD extension box, see
HDD extension box" on page
Concluding steps
▶ If applicable, install the expansion card, see
on page 346.
▶ Install the fan bridge, see
452
Figure 290).
277.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
Figure 289).
"Installing the 4x 3.5-inch
"Installing an expansion card"
92.
TX2550 M5