Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 289

Figure 176: Installing the HDD backplane (B)
▶ Place the bracket (see arrow) and fasten it with one screw (see circle).
▶ Fasten the HDD backplane with two screws (see
▶ Install the 4x 3.5-inch HDD extension box, see
HDD extension box" on page
Concluding steps
▶ Install the fan bridge, see
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶ Install all HDDs or dummy modules into their original bays in the HDD
extension box, see
"Installing a 3.5-inch dummy module" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
TX2550 M5
Hard disk drive (HDD) / solid state disk (SSD)
277.
"Handling the fan bridge" on page
68.
"Installing 3.5-inch HDD modules" on page 177
83.
Upgrade and Maintenance Manual
Figure
"Installing the 4x 3.5-inch
68.
181.
82.
172).
92.
and
289