Replacing The Power Distribution Board - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
6.4.3

Replacing the power distribution board

Field Replaceable Unit
(FRU)
Tools: Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
▶ If applicable,
"Removing the riser module" on page
▶
"Removing the crossbar" on page
Removing the power distribution board
▶ Remove the PSU from bay 2, see
▶ Remove the power distribution board, see
board" on page
TX2550 M5
158.
Upgrade and Maintenance Manual
Power supply unit (PSU)
83.
130.
Hardware: 10 minutes
47.
107.
49.
50.
51.
67.
88.
86.
90.
"Removing a hot-plug PSU" on page
"Removing the power distribution
148.
161