Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual page 443

▶
"Verifying and configuring the backup software solution" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the front cover is not required in order to replace an
accessible drive.
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
▶ If applicable,
"Removing the riser module" on page
▶ If applicable, remove the expansion card, see
card" on page 358.
▶ Remove the fan bridge, see
Removing the defective accessible drive
▶ Remove all cables from the accessible drive.
▶ Remove the accessible drive, see
page 441.
Installing the new accessible drive
▶ Install the accessible drive, see
▶ Connect all cables to their original accessible drive connectors, see
"Cables" on page
Concluding steps
▶ If applicable, install the expansion card, see
on page 346.
▶ Install the fan bridge, see
▶ If applicable,
"Installing the riser module" on page
▶
"Installing the PCI air duct" on page
TX2550 M5
"Handling the fan bridge" on page
"Removing an accessible drive" on
"Installing an accessible drive" on page
545.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
49.
50.
51.
67.
88.
86.
"Removing an expansion
"Installing an expansion card"
87.
89.
Accessible drives
110.
92.
435.
92.
443