Hard disk drive (HDD) / solid state disk (SSD)
Installing the HDD backplane
▶ If applicable, install the HDD backplane on the 4x 3.5-inch HDD extension
box, see
"Installing the new HDD backplane" on page
Installing the 4x 3.5-inch HDD extension box
Figure 168: Bending in mounting brackets
▶ Using a screw driver, bend the mounting brackets of the top and middle
installation bays (bay 1 and bay 2) inwards (see close-up):
▶ Bend in the four mounting brackets on each side of the drive cage.
▶ Open the accessible drive locking bar, see
locking bar" on page
278
96.
Upgrade and Maintenance Manual
288.
"Opening the accessible drive
TX2550 M5