Hard disk drive (HDD) / solid state disk (SSD)
Preliminary steps
▶ When working on a floorstand model, open the HDD bay cover, see
"Removing the accessible drive bay cover" on page
▶ Locate the correct drive bay, see
page
202.
▶ Depending on your OS (see the "NVMe User Guide"):
server" on page
Removing a 2.5-inch HDD/SSD dummy module
Figure 126: Removing a 2.5-inch HDD/SSD dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
226
"2.5-inch HDD/SSD configurations" on
49.
Upgrade and Maintenance Manual
63.
"Shutting down the
TX2550 M5