Fitting the cleaning brush on the Robacta Reamer
Alu Edition
Fitting the clean-
ing brush
A cleaning brush that has become very hot through use can cause severe burns.
Before handling the cleaning brush, allow cleaning brush to cool to room temperature
(+25°C, +77 °F).
Only use the device manufacturer's contact tips, gas nozzles and cleaning brushes.
If other manufacturers' products are used, trouble-free operation of the device cannot be
guaranteed. The manufacturer accepts no liability for damage resulting from the use of oth-
er manufacturers' contact tips, gas nozzles or cleaning brushes.
The cleaning brush and adapter are not included in the scope of supply.
Consult the device manufacturer's spare parts list for the appropriate cleaning brush.
1
2
2
3
42
CAUTION!
NOTE!
NOTE!
Remove the protective covering from the cleaning device
Fit the protective covering to the cleaning device in its original position