Table of Contents
Advertisement
Chapter 12 Protocol Decoding
side of the bus (when the bus display is enabled).
Event table
⚫
Press Event Table to enter the event table setting menu. The event table
displays the detailed decoding information in time order in the form of a
table, so as to better observe the long decoded data. The decoding
information includes the decoded data, word type, the corresponding line
number, time, and error information.
Open or close the event table: Press Event Table continuously to
➢
enable or disable the event table. When you enable the event table,
the following figure is displayed, as shown in Figure 12-15. You can
also enable the touch screen to tap the icon
corner of the table to close the event table.
Event Table
1553B Bus
Note:
⚫
⚫
Set the event table format: Press Format, rotate the multifunction
➢
knob
press down the knob to select it. You can also press Format
MSO8000 User Guide
Line Number Time Word Type Data
Figure 12-15 1553B Decoding Event Table
When you adjust the horizontal time base, the waveform displayed
on the screen will also change, and the total number of lines
containing the decoding information in the event table will also be
changed.
The displayed decoded data information in the bus is related to the
value of the horizontal time base. Reducing the horizontal time
base can help you view the detailed information.
to select the display format of "Data" in the event table. Then,
RIGOL
at the upper-right
Error
12-47
Advertisement
Table of Contents
