Table of Contents
Advertisement
RIGOL
management interface is displayed automatically. By default, "Local Disk(C)"
is selected.
2) Rotate the multifunction knob
internal memory storage interface.
3) Rotate the multifunction knob
and then press down the knob to open it. You can also enable the touch
screen to select the storage location. Rotate the multifunction knob
select
to go to the previous location.
4) Rotate the multifunction knob
file type is in "*stp" format). Then, the Load menu is enabled. Press Load
to load the selected file. You can also enable the touch screen to operate.
Tip
Press Ref → More → Import to enter the disk management interface of
⚫
reference waveform file load.
Press Utility → PassFail to enable the pass/fail test function. Then press
⚫
Mask → Load to enter the disk management interface of pass/fail test mask
file load.
19-8
, then press down the knob or enable the touch screen to tap
Chapter 19 Store and Load
or enable the touch screen to open the
to select the desired storage location,
to select the file to be loaded (the default
to
MSO8000 User Guide
Advertisement
Table of Contents
