Table of Contents
Advertisement
RIGOL
scale, and turn it counterclockwise to increase the scale. During the
modification, the display amplitude of the waveform will enlarge or reduce. The
scale information in the corresponding status label will change accordingly.
Press down this knob to quickly switch the vertical scale adjustment mode
between "Coarse" and "Fine".
Horizontal
Zoom: indicates the delayed sweep key. Press this key to enable or disable the
⚫
delayed sweep function.
Search: indicates the Search key. Press this key to enter the search setting
⚫
menu. The search function allows you to search for relevant events from the
collected data based on the search condition that you set.
⚫
combination keys, you can perform recording & playing navigation, time
navigation, and event navigation.
Horizontal
⚫
rotate the knob to modify the horizontal position (i.g. trigger position). The
trigger point would move left or right relative to the center of the screen when
you rotate the knob. During the modification, waveforms of all the channels
would move left or right, and the horizontal position message (e.g.
at the upper-right corner of the screen would change accordingly. Press down
this knob to quickly reset the horizontal position (or the delayed sweep
position).
Horizontal
⚫
the knob to modify the horizontal time base. Turn it clockwise to decrease the
time base, and turn it counterclockwise to increase the time base. During the
modification, waveforms of all the channels will be displayed in expanded or
compressed form, and the time base message (e.g.
1-16
: indicates the navigation combination key. With the
POSITION: indicates the horizontal position knob. You can
SCALE: indicates the horizontal time base knob. You can rotate
Chapter 1 Quick Start
) at the upper section
MSO8000 User Guide
)
Advertisement
Table of Contents
