Table of Contents
Advertisement
RIGOL
The trigger level label
⚫
the trigger level/threshold level value is displayed at the upper-right corner
of the screen.
When you use Trigger
⚫
level, the trigger level/threshold level value will change with the up and
down of
Note:
In Slope Trigger, Runt Trigger, and Window trigger, you need to set the
upper and lower limits of the trigger level, and two trigger level labels (
and
13. Operation Menu
Press any softkey on the front panel to activate the corresponding menu.
14. Notification Area
Displays the beeper icon, the USB storage device icon, time, and the LAN
connection icon.
Beeper icon: Press Utility → Beeper to turn on or off the beeper. When
⚫
the beeper is turned on,
displayed.
USB storage device icon: When a USB storage device is detected,
⚫
displayed.
Time: displays the system time. For the system time setting, refer to
⚫
descriptions in "System Time".
LAN connection icon: When the LAN interface is successfully connected,
⚫
will be displayed.
15. AWG 2
Displays the on/off status of AWG 2.
⚫
Displays the waveform type set for the current AWG 2.
⚫
It is only available for the model installed with the MSO8000-AWG option.
⚫
16. AWG 1
Displays the on/off status of AWG 1.
⚫
Displays the waveform type set for the current AWG 1.
⚫
It is only available for the model installed with the MSO8000-AWG option.
⚫
17. Digital Channel Status Area
Displays the current status of the 16 digital channels. The digital channels
currently turned on are displayed in green, and the currently selected digital
channel is highlighted in red. The digital channels turned off are displayed in
gray.
1-24
is displayed at the left section of the screen, and
.
) are displayed.
LEVEL to modify the trigger level/threshold
will be displayed; when off,
Chapter 1 Quick Start
will be
will be
MSO8000 User Guide
Advertisement
Table of Contents
