Safety Decal Locations - ELECTRO FREEZE GENESIS Series Operator's Manual

ELECTRO FREEZE Soft Serve Model GEN-5400

Safety Decal Locations

Do not attempt to operate the freezer
until all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution,
instruction and information decals (or
labels) on the freezer as shown in the
figure to the right. The labels have been
put there to help maintain a safe working
environment.
The labels have been designed to
withstand washing and cleaning. All
labels must remain legible for the life of
the freezer. Check labels periodically
to be sure they can be recognized as
warning labels.
If it is necessary to replace any label,
please contact your local authorized
Electro Freeze Distributor or H. C. Duke
& Son, LLC. When ready to order, you will
need to determine the (1) part number,
(2) type of label, (3) location of label, and
(4) quantity required, and include a return
shipping address.
No. Part No. Description (Qty)
1
HC165025 Decal — Beater Warning (1)
2
HC165126 Decal — Panel Removal (3)
3
HC165048 Decal — Rotating Parts (1)
4
HC165246 Decal — Pressurized System (1)
iv
You may contact your local authorized
Electro Freeze Distributor, as follows:
Name:
Address:
Phone:
or — for factory service assistance —
contact H. C. Duke & Son, LLC. Electro
Freeze Service Department by phone or
FAX:
Phone: (309) 755-4553
(800) 755-4545
FAX: (309) 755-9858
E-mail: service@hcduke.com
(The decals on the next page are
numbered 1, 2, and 3. Those numbers
correspond to the numbers in the table
below. The table provides the part
number, description, and quantity for each
decal.)