Safety Decal Locations - ELECTRO FREEZE SLX400C Operator's Manual

ELECTRO FREEZE Soft Serve Models SLX400C

Safety Decal Locations

Do not attempt to operate the freezer
until all safety precautions and operating
instructions in this manual are read and
understood.
Take notice of all warning, caution,
instruction and information decals (or
labels) on the freezer as shown in the
figure to the right. The labels have been
put there to help maintain a safe working
environment.
The labels have been designed to
withstand washing and cleaning. All labels
must remain legible for the life of the
freezer. Check labels periodically to be
sure they can be recognized as warning
labels.
If it is necessary to replace any label,
please contact your local authorized
Electro Freeze Distributor or H. C. Duke
& Son, LLC When ready to order you will
need to determine the (1) part number,
(2) type of label, (3) location of label, and
(4) quantity required, and include a return
shipping address.
vi
No. Part No.
1
HC165025-04 Decal — Beater Warning Black(1)
2
HC165025-03 Decal — Beater Warning Twist (1)
3
HC165126
You may contact your local authorized
Electro Freeze Distributor, as follows:
NAME:_______________________
ADDRESS:____________________
______________________________
PHONE:_______________________
or — for factory service assistance —
contact H. C. Duke & Son, LLC, Electro
Freeze Service Department by phone or
FAX:

Phone: (309) 755-4553
FAX: (309) 755-9858
E-mail: service@electrofreeze.com
(The decals on the next page are
numbered 1 and 2. Those numbers
correspond to the numbers in the table
below. The table provides the part
number, description, and quantity for each
decal.)
Description (Qty)
Decal — Panel Removal Warning (3)
(800) 755-4545
184582-01