Disassembly And Cleaning; Cleaning Accessories - ELECTRO FREEZE 876 Operator's Manual

ELECTRO FREEZE
6

Disassembly and Cleaning

It is important that the freezer be
disassembled, washed, lubricated and
sanitized before operation.
The cleaning and sanitizing instructions
explained in this manual are required to
maintain a clean, sanitary freezer. The
freezer should be disassembled, cleaned,
reassembled, lubricated and sanitized
to ensure the best possible product and
freezer operation. Persons assembling,
cleaning or sanitizing the freezer must
first wash their hands with an approved
sanitizer.
6.1

Cleaning Accessories

The following accessories are shipped with your freezer and are used when
cleaning and sanitizing your freezer:
1.) HC158077 BRUSH: 9/16-inch
diameter with a 36-inch handle used
for cleaning the drain tubes and mix
inlet tube.
2.) HC158026 BRUSH: 1-inch diameter
with 12-inch handle.
General parts cleaning.
3.) HC158022 BRUSH: 1/4-inch
diameter with an overall length of
6-1/2 inches. General parts cleaning.
4.) HC158000A LUBRICANT:
Approved lubricant for moving parts
and O-rings. See Assembly, Section
8 for lubricating points.
Figure 7-1 Cleaning Accessories
184633
Models 876, 876B, 876C, 876RH, 876BRH, 876CRH & 875 Batch
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the "OFF" position and that
the main power supply is
disconnected.
13