Cleaning Accessories - ELECTRO FREEZE GENESIS Series Operator's Manual

ELECTRO FREEZE Soft Serve Model GEN-5400

7.1 Cleaning Accessories

The following accessories shipped with the freezer are necessary for cleaning,
sanitizing, and disassembly/assembly:
1.)
2.)
3.)
4.)
5.)
3 HC158018 BRUSH -7/16" DIA x 12" OAL
4 HC158026 BRUSH -1" DIA x 12" LG.
5 HC158037 BRUSH -1/4" DIA x 18-1/2" LG.
Figure 7-1 Cleaning Accessories
184297
HC158004 BRUSH: 4 inch diameter
with 36 inch handle used to clean
the shake cylinder.
HC158019 BRUSH: 9/16 inch
diameter 30 inches long used to
clean drain tube, the mix feed tube
in the ceiling of the cabinet and the
pickup tube.
HC158018 BRUSH: 7/16 inch
diameter 12 inches long used to
clean transfer hose, braided hose,
and the air relief opening in the
dispense head.
HC158026 BRUSH: 1 inch diameter
12 inches long used to clean
the disassembled shaft seal and
bushing.
HC158037 BRUSH: 1/4 inch
diameter 18-1/2 inches overall
length used to clean the air meter
hose, the small hole in the back
of the dispense head and small
parts.
2
HC158019 BRUSH -9/16" DIA x 30" OAL
6
6.) HC169374 TOOL - O-RING
REMOVAL: Aids in removing
O-rings from plunger, head, air relief
plug, and spindle.
7.) HC158054A LUBRICANT -
LUBRI-FILM PLUS: Approved
lubricant for moving parts and
O-rings.
8.) HC196103 BOTTLE, WASH:
Used to flush the hose cavity, roller
assembly and plunger.
1 HC158009 BRUSH - 4" DIA x 40"
& HC158012 HANDLE
HC169374 TOOL -O RING
REMOVAL
7 HC158054A
LUBRICANT-
8
HC196103 BOTTLE-
LUBRI-FILM
WASH 500ml
PLUS
(OPTIONAL)
21