Omron TJ2-MC02 Hardware Reference Manual page 238

Hardware reference
3.11.12 FQ-M-series Vision Sensors
The FQ-M Series is a series of Vision Sensors that are designed to be
integrated with high-speed positioning equipment.
The following types are supported:
Item Type
FQ-M-series Monochrome
Vision Sensors
Color
Label Terminal/LED Description
An I/O Cable is used to connect the Sensor to the power
(1) I/O connector
supply and external devices.
An Ethernet cable is used to connect the Sensor to external
(2) Ethernet connector
devices such as PLCs, the Touch Finder, or computers.
This connector is used to connect to external lighting (a
(3) Lighting connector
Strobe Controller).
EtherCAT input This connector is used to connect to EtherCAT-compatible
(4)
connector devices.
EtherCAT output This connector is used to connect to EtherCAT-compatible
(5)
connector devices.
These switches are used to set the node address as an
Node address
(6) EtherCAT communications device. The setting range is 00
setting switches*
to 99.
(7) Mounting holes These mounting holes are used to mount the camera.
The C-mount lens is attached here. Determine the
appropriate CCTV lens (C-mount lens) to use based on the
(8) C-mount lens fitting
field of view required for the size of the measurement
object.
Strobe Controller The Strobe Controller is attached here. The Vision Sensor
(9)
mounting holes is compatible with the FL-TCC1.
HARDWARE REFERENCE MANUAL
Model
FQ-MS@@@-M-ECT
FQ-MS@@@-ECT
fig. 125
(10)
(9)
(8)
(7)
(6) (2)
(4)
(1)
(11)
(7)
(5)
(3)
232