Table of Contents
Advertisement
Hardware reference
Step 5
Mount the Inverter Connector (no.1) of the Option Board onto the interface
connector (no.5) of the RX Inverter.
First align the small hole of the Inverter connector (no.2) with the guide-post
(no.4) in the Inverter.
Step 6
Then align the larger hole on the Inverter connector (no.3) with the
threaded hole (no.6) in the Inverter.
Push the Inverter connector into place.
HARDWARE REFERENCE MANUAL
fig. 60
fig. 61
131
Advertisement
Table of Contents
