Figure C-3: Recovery Tool Setup Menu; Figure C-4: Command Mode - IEI Technology KINO-PV-D5253-D4253 User Manual

Figure C-3: Recovery Tool Setup Menu

Press <5> then <Enter>.

Figure C-4: Command Mode

The command prompt window appears. Type the following commands (marked in red) to
create two partitions. One is for the OS installation; the other is for saving
recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>create part pri size=
DISKPART>assign letter=F
DISKPART>exit
system32>format N: /fs:ntfs /q /y
system32>format F: /fs:ntfs /q /v:Recovery /y
system32>exit
P age 96
K INO-P V-D5253-D4253 Mini-IT X Motherboard
___
___