Performance Specifications G1314D - Agilent Technologies 1200 Infinity Series User Manual

2
Site Requirements and Specifications

Performance Specifications G1314D

Performance Specifications G1314D

Performance Specifications G1314D
Table 3 Performance Specifications
Type Specification
Detection type Double-beam photometer
Light source Deuterium lamp
Wavelength range 190 – 600 nm
Short term noise
± 0.15·10
Drift
< 1·10
Linearity > 2.5 AU (5 %) at 265 nm
Wavelength ± 1 nm
accuracy
Maximum sampling 20 Hz
rate
Band width 6.5 nm typical
Flow cells Standard: 14 µL volume, 10 mm cell path length
and 40 bar (588 psi) pressure maximum
High pressure: 14 µL volume, cell path length
and 400 bar (5880 psi) pressure maximum
Micro: 2 µL volume, 3 mm cell path length and
120 bar (1760 psi) pressure maximum
Semi-micro: 5 µL volume, 6 mm cell path length
and 40 bar (588 psi) pressure maximum
24
-5
AU at 230 nm
-4
AU/h at 230 nm
Comments
The UV-lamp is equipped with RFID tag that
holds lamp typical information.
Under specified condtions. See
Conditions G1314D" on page 26 below the
table.
Under specified condtions. See
Conditions G1314D" on page 26 below the
table.
Under specified condtions. See
Conditions G1314D" on page 26 below the
table.
Self-calibration with deuterium lines,
verification with holmium oxide filter
All flow cells have RFID tags for unambitious
identification.
Can be repaired on component level
Agilent 1200 Infinity Series VWD - User Manual
"Specification
"Specification
"Specification