Setup (Dhcp) - Agilent Technologies 1200 Infinity Series User Manual

13
LAN Configuration
Dynamic Host Configuration Protocol (DHCP)

Setup (DHCP)

Software required The modules in the stack must have at least firmware from set A.06.34 and the above mentioned
modules B.06.40 or above (must from the same firmware set).
1 Note the MAC address of the LAN interface (provided with G1369C
206
LAN Interface Card or Main Board). This MAC address is on a label on
the card or at the rear of the main board, e.g. 0030d3177321.
On the Instant Pilot the MAC address can be found under Details in the
LAN section.
Figure 67 LAN Setting on Instant Pilot
Agilent 1200 Infinity Series VWD - User Manual