13
LAN Configuration
What you have to do first
What you have to do first
The module has an on- board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface to
198
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware
address. The MAC address can be found on a label at the rear of the
module underneath the configuration switch.
Figure 60
Location of Configuration Switch and MAC Label
•
the PC network card using a crossover network cable (point- to- point)
or
•
a hub or switch using a standard LAN cable.
Agilent 1200 Infinity Series VWD - User Manual