Recall Operation; Data Logging Function - ITech IT-M3900B Series User Manual

4. Press [Enter] to save the parameters.

6.3.2 Recall Operation

You can recall the parameters you saved in the specified memory location as
the setting values.
1. Press [Shift]+[Enter] (Recall) to enter the parameter recall interface. (1U
2. Press [Shift]+[0] (Recall) to enter the parameter recall interface. (2U Model)
3. Set the storage location.
4. Press [Enter] to recall the parameters.

6.4 Data Logging Function

This series Regenerative Power System supports the recording and saving of
test data. This Chapter introduces how to use this function in details.
The user can select the following data sources for recording:
•
•
•
Configure the Function Menu
1. Press the composite button [Shift]+[1] (Log) on the front panel to enter the
Enter a number in the "Save data to bank=1" to set the storage location in
non-volatile memory.
Model)
Enter a number in the "Recall data from bank=1" to set the storage location
in non-volatile memory.
Voltage
Only records voltage data during the data acquisition period.
Current
Only records current data during the data acquisition period.
Voltage and current
Records current and voltage data during the data acquisition period.
configuration menu of the data logging function.
The parameters are described as follows:
Copyright © Itech Electronic Co., Ltd.
Basic Operation
150