Use In Hazardous Environments - WAGO 750 XTR Manual

WAGO I/O System 750 XTR
750-600/040-001 End Module with Potential Group XTR
6

Use in Hazardous Environments

The WAGO I/O System 750 (electrical equipment) is designed for use in Zone 2
hazardous areas and shall be used in accordance with the marking and
installation regulations.
The following sections include both the general identification of components
(devices) and the installation regulations to be observed. The individual
subsections of the "Installation Regulations" section must be taken into account if
the I/O module has the required approval or is subject to the range of application
of the ATEX directive.
Use in Hazardous Environments 35
Manual
Version 1.0.1