Table of Contents
Advertisement
12 February 1992
(2) Separation Clutch Lubrication
[C]
[A]
1. Remove the separation roller [A] (see Separation Roller Replacement).
2. Slide the slip clutch [B] with the clutch cover [C] off the shaft.
3. Separate the slip clutch into the three components.
4. Clean the clutch spring [D] and the clutch hubs [E].
5. Put Mobil Temp. 78 in the three grease holes [F] of the drive hub [G] and
the inner surface of the spring.
[B]
5-39
[E]
[D]
[G]
PAPER FEED
[F]
Advertisement
Table of Contents
