PAPER FEED
5.8
LCT LIFT MOTOR REPLACEMENT
1. Remove the LCT from the copier (refer to LCT Drive Belt Replacement).
2. Remove the motor cover plate [A] (2 screws).
3. Remove the LCT lift motor assembly [B] (4 screws, 4 rubber rings, 1
connector).
4. Remove the E-ring [C] from the worm gear shaft.
5. Slide the bushing [D] inwards and remove the worm gear assembly [E].
6. Remove the LCT lift motor [F] (2 screws).
[C]
[D]
5-46
12 February 1992
[B]
[F]
[E]
[A]