Table of Contents
Advertisement
12 February 1992
2.1.2 Installation Procedure
[A]
NOTE: Keep the shipping retainers after installing the machine. They will
be reused if in the future the machine is transported to another
location.
Proper reinstallation of the shipping retainers is required in order
to avoid any transport damage. It is important to replace the
scanner lock pins and the scanner lock plate before transporting
this copier. If it is not done, skewed image may result.
1. Remove the 7 strips of tape [A] as shown.
2. Open the front door and remove 4 strips of tape [B] as shown.
3. Pull out the paper tray [C], and remove a strip of tape [D] and the foam
block [E] (1 tray for the duplex machine and 2 trays for the non-duplex
machine).
4. Pull out the duplex tray [F] and remove the 2 strips of tape [G] and 3
sheets of paper [H] (duplex machine only).
[A]
[H]
[G]
[F]
[C]
3-5
COPIER INSTALLATION
[B]
[E]
[A]
[D]
Advertisement
Table of Contents
