Ricoh FT4227 Manual page 188

SERVICE PROGRAM MODE
Mode No.
88 PM Counter
89 PM Counter Clear
90 User Code Mode
User code Counter
• 91
Check
User Code
• 92
Counter Clear
• 93
Copy Limit
SC/Jam Counter
97
Clear
Function
Displays contents of the PM counter.
(When entering this mode by pressing the "# "
key, the first three digits are displayed in the
three digit indicator.
Hold down the " • " key to display the second
three digits.
When the PM counter is exceeded, the three
digit indicator [reproduction ratio] blinks.)
Resets the PM counter.
(Use this mode after performing PM.
The three digit indicator counts down from 100
to 0 when this function is used.)
Enables user code mode (The key counter
shorting connector must be removed.)
(If this mode is set, users must enter a code to
make copies.
Resets when auto clear mode functions or
when C/S and clear modes keys are pressed
together.
The user codes are the following 20 numbers:
1101, 1202, 1303, 1404, 1505, 1606, 1707,
1808, 1909, 2010, 2111, 2212, 2313, 2414,
2515, 2616, 2717, 2818, 2919, 3020).
Displays the contents of each user code
counter. use the "+ " and "–" ("up" and "down")
keys to select user code. (The last two digits of
the user code are displayed in the copy
counter.)
(User counters count from 0 to 999999.
Press "# " key to display the first three digits in
the three digit indicator.
Hold down the " • " key to display the second
three digits.)
Resets counters of all the user codes (SP91).
(To reset, press "1" then the "# " key.
The three digit indicator counts down from 100
to 0 when this function is used.)
Limits the maximum copy quantity that can be
entered.
Clears all the service call and jam counters.
(To clear, press "1" then the "# " key.
The three digit indicator counts down from 100
to 0 when this function is used.)
4-10
10 July 1992
Data
0: No
1: Yes
0: No
1: Yes
1 – 999
999 = default
0: No
1: Yes