DEVELOPMENT AND TONER SUPPLY
3.
DEVELOPMENT AND TONER SUPPLY
3.1
DEVELOPMENT UNIT REMOVAL
3.1.1 Black Development Unit
1. Open the front door.
2. Push the development unit lock lever [A] to the right (to the lock position).
3. Move the development release lever [B] to the right and pull out the black
development unit [C] half way. Holding the toner supply unit [D] with your
right hand and the bottom of the development unit with your left hand, pull
the unit all the way out. Place the unit on a clean sheet of paper.
NOTE: The color development unit or cover plate should be installed
before installation.
[D]
5-22
[B]
[C]
12 February 1992
[A]