Table of Contents
Advertisement
10 July 1992
[B]
4. Remove the left scale [A] (2 shoulder screws).
5. Remove the scanner lock pin [B] simply by pulling it up from the front
and the rear side of the left scale bracket.
6. Reinstall the left scale.
7. Remove the left optics cover [C] (1 screw).
8. Remove the scanner lock plate [D] (1 screw) and reinstall the left optics
cover.
9. Remove the shipping retainer [E] holding the ozone filter. The retainer is
taped on the upper exit cover.
[A]
[C]
[E]
3-3
COPIER INSTALLATION
[D]
Advertisement
Table of Contents
