Ricoh FT4227 Manual page 245

12 February 1992 PAPER PATH
6.3 SINGLE 2-SIDED COPYING
[D]
[A]
[B]
[C]
Any sheet up to A3\11" x 17" but except for A4, B5, or 8 " X 11" sideways
1/2
can be used for single 2-sided copying. In this mode, the sheet follows the
same path as in multiple 2-sided copying to the duplex tray. However, the
end fence [A] of the duplex tray lowers. The sheet advances over the lowered
end fence. The sheet is stopped by the friction between the duplex feed and
friction rollers [B,C]. It is directed to the relay rollers [D] by the reversed
duplex feed roller. It stays there once. After that, the sheet follows the same
path as in multiple 2-sided copying from the relay rollers to copy tray.
1-15