Table of Contents
Advertisement
10 July 1992
2.
TONER SUPPLY
2.1
TONER SUPPLY CLUTCH REMOVAL
[A]
[C]
[B]
[D]
1. Turn off the main switch and remove the rear cover.
2. Swing out the main control board assembly.
3. Remove the tension spring [A].
4. Remove the support bracket [B] (3 screws) and gear [C].
5. Remove the toner supply clutch assembly [D] (2 screws, 1 wire saddle,
and 1 connector).
6. Remove the toner supply clutch [E] (1 E-ring).
NOTE: When reinstalling the clutch, make sure that the clutcch stopper
groove engages with the stopper [F].
[E]
5-5
TONER SUPPLY
[F]
Advertisement
Table of Contents
