COPIER INSTALLATION
[D]
6. Pass the 4P connector [A] of the key counter holder [B] through the key
counter holder access hole and couple it with the key counter connector
[C] of the copier.
7. Hold the fixing plate [D] on the inside of the key counter holder bracket [E]
and insert the key counter holder.
8. Align the holes in the fixing plate with the mounting holes of the key
counter holder and secure the key counter holder (2 screws).
NOTE: The fixing plate has three different hole sizes. Use the holes that
match those on the key counter holder that you are installing.
9. Reinstall all the covers and check the key counter operation.
[C]
[A]
[E]
3-20
12 February 1992
[B]