10 July 1992
41. Press the enter key and enter "56" using the number keys.
42. Press the enter key, then the start key.
(The copier performs the ADS sensor adjustment.)
43. Turn the main switch off and on.
44. Enter "6" using the number keys and make copies in the full size mode.
(The copier performs the V
When the copy cycle is finished, the copier performs the V
check by lighting the exposure lamp at the home position.)
45. Check the machine operation and copy quality.
46. Tell the customers that this copier sometimes keeps turning on the
exposure lamp at the home position when copy jobs are finished (the
same phenomenon as in step 44).
This is normal for this copier, and this also helps maintain good copy
quality.
sensor initial check during the copy cycle.
R
3-11
COPIER INSTALLATION
sensor initial
L