Table of Contents
Advertisement
SERVICE PROGRAM MODE
Mode No.
84
Editing Eraser
85
TEL No.
Under Color
•86
Density
87
PM Interval
88
PM Counter
89
PM Counter Clear
90
User Code Mode
Function
Enables edit erase lamp unit operation.
(The copier CPU automatically enables edit
erase lamp unit when the editor is installed.)
Use to input the telephone number of the
service depot.
(Pressing " • " key shows "–" in the guidance
display.)
Adjusts color background density in highlight
color mode of editor.
(Only effective when the editor is installed.
Each color can have an independent under
color density.
Adjusted under color density corresponds to
the color development unit installed in the
copier.)
Sets the interval of the PM counter.
Displays contents of the PM counter.
(When entering this mode by pressing the "#"
key, the first three digits are displayed in the
three digit indicator.
Hold down the " • " key to display the second
three digits.
When the PM counter is exceeded, the call
service indicator blinks and the key counter
indicator lights.)
Resets the PM counter.
(Use this mode after performing PM.
Beeper sounds 2 times when this function is
used.)
Enables user code mode (Key counter
shorting connector must be removed.)
(If this mode is set, a user must enter a code
to make copies.
Resets when auto clear mode functions or
when C/S and clear mode keys are pressed
together.
The user codes are the following 20 numbers:
1101, 1202, 1303, 1404, 1505, 1606, 1707,
1808, 1909, 2010, 2111, 2212, 2313, 2414,
2515, 2616, 2717, 2818, 2919, 3020).
4-20
12 February 1992
Data
0: No
1: Yes
1: Darkest
–
4: Normal
–
7: Lightest
0: No PM
1: 60 K
2: 80 K
3: 100 K
4: 120 k
0: No
1: Yes
Advertisement
Table of Contents
