Ricoh FT4227 Manual page 525

12 February 1992
7. FUSING
7.1 FUSING UNIT REMOVAL
[A]
1. Open the front cover and lower the T & S corona unit.
2. Remove the cleaning unit (see Cleaning Unit Removal).
3. Hold the fusing unit cover [A] while pushing the release lever [B], and pull
out the fusing unit [C] until it stops.
4. Remove the fusing unit lock screw [D] (1 shoulder screw).
5. Remove the fusing unit completely while pushing the release lever.
NOTE: Before completely removing the fusing unit, support the bottom of
the fusing unit.
[C]
5-69
FUSING
[D]
[B]