Table of Contents
Advertisement
OPTICS
2.7
LENS DRIVE WIRE REPLACEMENT
2.7.1 Wire Removal
[C]
1. Turn off the main switch.
2. Remove the following parts:
•
The exposure glass
•
The top cover
•
The rear cover
•
The lens cover
•
The left scale bracket
3. Slide the 1st scanner [A] half of the way to the right.
4. Remove the 2 fixing screws of the rear scanner guide rail [A].
5. Remove the lens drive wire [B] as shown.
5-18
12 February 1992
[B]
[A]
Advertisement
Table of Contents
